Nieuwe versie OpenTX

FPV - GPS - Ontvangers - Zenders etc.
Plaats reactie
Gebruikersavatar
GVT
Lid
Berichten: 301
Lid geworden op: ma sep 29, 2014 11:17 pm
Locatie: Elburg
Contacteer:

Nieuwe versie OpenTX

Bericht door GVT » za jun 13, 2020 7:14 pm

Er is weer een nieuwe versie van OpenTX : v.2.3.8

New since 2.3.7

COLORLCD RADIOS
Fix missing 0 in date format
In mixer screen, display output name in bottom bar if available
Text viewer is now displaying one more line
Fix 2x1 layout that was allowing two widgets in the same location
Fix issue in model selector when some bitmaps were missing in SD card
Add ES and PT special characters
Battery icon has been reviewed and support charge icon on relevant radios
Gauge widget text vertical centering improved
Fix an issue where change UID were not displayed until ENTER was pushed
Model selection now selects the current category/model on entering
Secure display buffer access from lua (fixes crashes from yaapu telemetry)

B&W RADIOS
Fix an issue on 128x64 when exiting Gvar menu
Fix an issue on 128x64 where it was possible to get Edit on logical switch page index
Fix several 9XR Pro issues (navigation, extra module,..)
Fix switching between channel and mixer monitor on XLite

FRSKY
RAS is now displayed for the right module
OTA Firmware update fixes on Horus
Add X7 Access simu to Mac companion
Add VFR
Powers now displayed in mW rather than dB

MULTIMODULE
Support for alphabetical protocol ordering
Support for FrSky 2.1 ACCST protocols
Support for TX clone mode
Support for HoTT telemetry
Add multi channel naming utility to tools

LUA
Add units definition to LUA (UNIT_VOLTS,…) for B&W radios
Use the right precision for unknown sensor
Add table library to colorlcd radios
Fix BattCheck taking too much CPU
Add EVT_EXIT_BREAK to colorlcd radios
Add serialRead function

COMPANION
Fix an issue where sensors would be affected by import into Companion
Fix an issue where telemetry simulator would not work on sensors discovered on radio itself
Add option to prompt for profile on opening (Thx elecpower)
Add option for current user/all user install (Thx pre-martin)
Improvement in copy/paste/move feature (Thx elecpower)
Allow alphanumerical ownerID
Add ml/min unit support
Fix Cels unit
Fix custom failsafe display when 2 modules are enabled in custom mode
Fix missing Haptic settings for some radios
Add version for Add/remove programs on Windows

MISCELANEOUS
Fix issue where switch/flightmode wav play could be broken with long model/flightmode name
Jumper T12: fix DMA conflict between SD and internal module
Jumper T12: fix an issue with curve edition in mixer screen
Jumper T12 Pro: allow multi trainer
Fixes in Spanish, Italian, French and Japaneese languages (thx translators !)
Fixes issue on curve edit when using rotary encoder
INTERNAL_MODULE_PPM option has been fixed, and removed from Companion
Fix overflow on flight mode change with large mixer weights
Fix flight mode wavs not playing when the mode name was too long
Increase Bluetooth buffer length for fast telemetry (fixes crash with 400k crossfire telemetry mirror)

Gebruikersavatar
GVT
Lid
Berichten: 301
Lid geworden op: ma sep 29, 2014 11:17 pm
Locatie: Elburg
Contacteer:

Re: Nieuwe versie OpenTX

Bericht door GVT » zo jun 14, 2020 7:18 pm

Versie 2.3.9 al weer met de volgende fix;

COLORLCD RADIOS
Fix an issue where companion would pop an error message when flashing the new otx firmwares

MISCELANEOUS
Revert non working fix for “overflow on flight mode change with large mixer weights” [#7623]. This bug fixes is now scheduled for 2.3.10

Gebruikersavatar
GVT
Lid
Berichten: 301
Lid geworden op: ma sep 29, 2014 11:17 pm
Locatie: Elburg
Contacteer:

Re: Nieuwe versie OpenTX

Bericht door GVT » vr jan 08, 2021 4:21 pm


Gebruikersavatar
GVT
Lid
Berichten: 301
Lid geworden op: ma sep 29, 2014 11:17 pm
Locatie: Elburg
Contacteer:

Re: Nieuwe versie OpenTX

Bericht door GVT » di jun 15, 2021 8:38 am

Versie 2.3.12
http://www.open-tx.org/2021/06/14/opentx-2.3.12

New since 2.3.11

COLORLCD RADIOS
Add GUI for more slider/pots calibration
Fix some minor font glitches
Add a Quad wizard
Improve readability of switch warning when multiple switches are involved
B&W RADIOS
Some italian fixes
Allow shortening of file names in SD manager
Increase popup size on small screen
LUA
Send 0 with LUA getRSSI() when no telemetry is streaming
Add getAvailableMemory()
MULTIMODULE
Always prioritize protocol data coming directly from the module
Add support for SX1276 power indication
Support for M-Link telemetry
Fix per channel failsafe
Add support for module config (to allow two multimodule to use the same ID for example)
Update data tables to 1.3.2.84 (thanks MRC3742)
FRSKY
add SI support to X9D 2019
add support for FPORT2
add support for race mode
MISCELANEOUS
6POS position are now autodetected when setting up switches source
Support for ImmersionRC Ghost GPS sensor
Improve switching between modules using different modules
Fix Ghost channel range UI glitch
COMPANION
A lot of improvement by Elecpower (tons of thanks to him)
Fix trainer mode handling for some radios
Align RSSI alarm range with radios
Fix script max name lenght
Support for 1S radio battery
French translation updates (Thx LapinFou)
Japanese translation updates (Thx ToshihiroMakuuchi)

Gebruikersavatar
GVT
Lid
Berichten: 301
Lid geworden op: ma sep 29, 2014 11:17 pm
Locatie: Elburg
Contacteer:

Re: Nieuwe versie OpenTX

Bericht door GVT » do jun 24, 2021 8:03 pm

Versie 2.3.13

http://www.open-tx.org/2021/06/24/opentx-2.3.13

New since 2.3.12

Fix Horus ISRM jittery pulses
Fix Horus PCBDEV compilation
Fix T8 Pro rebooting

Gebruikersavatar
GVT
Lid
Berichten: 301
Lid geworden op: ma sep 29, 2014 11:17 pm
Locatie: Elburg
Contacteer:

Re: Nieuwe versie OpenTX

Bericht door GVT » zo jul 25, 2021 8:40 pm

Versie 2.3.14

http://www.open-tx.org/2021/07/23/opentx-2.3.14

New since 2.3.13

ALL RADIO
fix excessive RTC battery drain (Bug affecting all radio model, introduced in 2.3.0, thx MikeB for spotting this)
ACCESS RADIO
fix possible jerky servo movement
X9D+ 2019 RADIO
fix trainer mode change potentially triggering emergency mode
fix trainer jack detection
MISCELLANEOUS
fix AFHSD3 option not available on some radio (x7/x9d+)
fix AFHSD3 broken on colorlcd radio since 2.3.12
COMPANION
fix curve tip window showing blank
fix Companion MacOsx not running on some version of MacOsx
fix negative sign missing for telemetry source formula

Gebruikersavatar
GVT
Lid
Berichten: 301
Lid geworden op: ma sep 29, 2014 11:17 pm
Locatie: Elburg
Contacteer:

Re: Nieuwe versie OpenTX 2.3.15

Bericht door GVT » za apr 23, 2022 3:16 pm

http://www.open-tx.org/2022/04/22/opentx-2.3.15

New since 2.3.14

RADIOMASTER ZORRO
Support for ELRS and multi version (ELRS require choosing internalELRS in companion options)
Support for small size Access modules (R9M pro,…)
JUMPER T-PRO
Support for ELRS and multi version (ELRS require choosing internalELRS in companion options)
Support for OpenTX controlled multipos function switches. More info at : https://github.com/opentx/opentx/wiki/Function-switches
ALL RADIOS
ELRS/Crossfire and Ghost module have now additional info like mixer rate or link speed in model setup
Radio with rotary encoder now have an option to invert encoder direction in radio setup
Throttle alerts are no longer dismissed by rotary encoder move
Support for Ghost 12bits protocol
Fix SBUS modules timings entries not always working
Switch display on main view now better matches radio physical implementation
Improve mixer rate when radio is used in joystick mode (2ms)
Add a new USB telemetry mirror function for USB links (Thanks vimalb)
LUA
Addition of function to managed flybared heli setups
Add a function to flash audio queue (flushAudio())
Better error message display on 128 screens
Lua task preempts long-running scripts instead of killing them
Add support for Ghost telemetry (ghostTelemetryPop(=/ghostTelemetryPush()))
MISCELLANEOUS
Improve HoTT telemetry (Thanks mha1)
Add support for improved rotary encoder board for TX16S (also in MK2)
Support for MPM 1.3.11
Colorlcd radio wizard now properly obeys default channel order
Fix trainer detection of some FrSky radios (X9 Lite, X7 Access)
COMPANION
Add optional prompt before writing files and models to radio
Clarifies wording for folder sync
French and Japanese translation improved (Thanks Lapinfou and Toshihiro Makuuchi)
Adjust simu clock according to local time on start

Plaats reactie