Nieuwe versie OpenTX
Geplaatst: za jun 13, 2020 7:14 pm
Er is weer een nieuwe versie van OpenTX : v.2.3.8
New since 2.3.7
COLORLCD RADIOS
Fix missing 0 in date format
In mixer screen, display output name in bottom bar if available
Text viewer is now displaying one more line
Fix 2x1 layout that was allowing two widgets in the same location
Fix issue in model selector when some bitmaps were missing in SD card
Add ES and PT special characters
Battery icon has been reviewed and support charge icon on relevant radios
Gauge widget text vertical centering improved
Fix an issue where change UID were not displayed until ENTER was pushed
Model selection now selects the current category/model on entering
Secure display buffer access from lua (fixes crashes from yaapu telemetry)
B&W RADIOS
Fix an issue on 128x64 when exiting Gvar menu
Fix an issue on 128x64 where it was possible to get Edit on logical switch page index
Fix several 9XR Pro issues (navigation, extra module,..)
Fix switching between channel and mixer monitor on XLite
FRSKY
RAS is now displayed for the right module
OTA Firmware update fixes on Horus
Add X7 Access simu to Mac companion
Add VFR
Powers now displayed in mW rather than dB
MULTIMODULE
Support for alphabetical protocol ordering
Support for FrSky 2.1 ACCST protocols
Support for TX clone mode
Support for HoTT telemetry
Add multi channel naming utility to tools
LUA
Add units definition to LUA (UNIT_VOLTS,…) for B&W radios
Use the right precision for unknown sensor
Add table library to colorlcd radios
Fix BattCheck taking too much CPU
Add EVT_EXIT_BREAK to colorlcd radios
Add serialRead function
COMPANION
Fix an issue where sensors would be affected by import into Companion
Fix an issue where telemetry simulator would not work on sensors discovered on radio itself
Add option to prompt for profile on opening (Thx elecpower)
Add option for current user/all user install (Thx pre-martin)
Improvement in copy/paste/move feature (Thx elecpower)
Allow alphanumerical ownerID
Add ml/min unit support
Fix Cels unit
Fix custom failsafe display when 2 modules are enabled in custom mode
Fix missing Haptic settings for some radios
Add version for Add/remove programs on Windows
MISCELANEOUS
Fix issue where switch/flightmode wav play could be broken with long model/flightmode name
Jumper T12: fix DMA conflict between SD and internal module
Jumper T12: fix an issue with curve edition in mixer screen
Jumper T12 Pro: allow multi trainer
Fixes in Spanish, Italian, French and Japaneese languages (thx translators !)
Fixes issue on curve edit when using rotary encoder
INTERNAL_MODULE_PPM option has been fixed, and removed from Companion
Fix overflow on flight mode change with large mixer weights
Fix flight mode wavs not playing when the mode name was too long
Increase Bluetooth buffer length for fast telemetry (fixes crash with 400k crossfire telemetry mirror)
New since 2.3.7
COLORLCD RADIOS
Fix missing 0 in date format
In mixer screen, display output name in bottom bar if available
Text viewer is now displaying one more line
Fix 2x1 layout that was allowing two widgets in the same location
Fix issue in model selector when some bitmaps were missing in SD card
Add ES and PT special characters
Battery icon has been reviewed and support charge icon on relevant radios
Gauge widget text vertical centering improved
Fix an issue where change UID were not displayed until ENTER was pushed
Model selection now selects the current category/model on entering
Secure display buffer access from lua (fixes crashes from yaapu telemetry)
B&W RADIOS
Fix an issue on 128x64 when exiting Gvar menu
Fix an issue on 128x64 where it was possible to get Edit on logical switch page index
Fix several 9XR Pro issues (navigation, extra module,..)
Fix switching between channel and mixer monitor on XLite
FRSKY
RAS is now displayed for the right module
OTA Firmware update fixes on Horus
Add X7 Access simu to Mac companion
Add VFR
Powers now displayed in mW rather than dB
MULTIMODULE
Support for alphabetical protocol ordering
Support for FrSky 2.1 ACCST protocols
Support for TX clone mode
Support for HoTT telemetry
Add multi channel naming utility to tools
LUA
Add units definition to LUA (UNIT_VOLTS,…) for B&W radios
Use the right precision for unknown sensor
Add table library to colorlcd radios
Fix BattCheck taking too much CPU
Add EVT_EXIT_BREAK to colorlcd radios
Add serialRead function
COMPANION
Fix an issue where sensors would be affected by import into Companion
Fix an issue where telemetry simulator would not work on sensors discovered on radio itself
Add option to prompt for profile on opening (Thx elecpower)
Add option for current user/all user install (Thx pre-martin)
Improvement in copy/paste/move feature (Thx elecpower)
Allow alphanumerical ownerID
Add ml/min unit support
Fix Cels unit
Fix custom failsafe display when 2 modules are enabled in custom mode
Fix missing Haptic settings for some radios
Add version for Add/remove programs on Windows
MISCELANEOUS
Fix issue where switch/flightmode wav play could be broken with long model/flightmode name
Jumper T12: fix DMA conflict between SD and internal module
Jumper T12: fix an issue with curve edition in mixer screen
Jumper T12 Pro: allow multi trainer
Fixes in Spanish, Italian, French and Japaneese languages (thx translators !)
Fixes issue on curve edit when using rotary encoder
INTERNAL_MODULE_PPM option has been fixed, and removed from Companion
Fix overflow on flight mode change with large mixer weights
Fix flight mode wavs not playing when the mode name was too long
Increase Bluetooth buffer length for fast telemetry (fixes crash with 400k crossfire telemetry mirror)